Concrete Floor Screed in Woolwich
Screed is a thin layer of specialist concrete which can be applied to flooring in order to create a smooth finish.
Floor screed is laid down on top of structural concrete or insulation and under floor heating. After this a final floor covering such as tiling is laid, although it can be left bare to achieve a contemporary effect.
We are Woolwich suppliers of concrete and floor screed and have been supplying domestic and commercial customers around South East London with high quality products and services for many years.
Our concrete provision allows for the bulk mixing and delivery of high quality floor screed, a perfect finish for your Woolwich concrete flooring.
Woolwich Floor Screed of All Strengths
We use quality aggregates in order to mix a large range of different strength concrete floor screeds ideal for any type of application. We are also able to add polypropylene fibres to strengthen bonding during the curing stage.
As experienced Woolwich SE18 concrete floor screed suppliers we are on hand to offer you any advice or information you may need. We ensure preparation and laying of the screed is clearly described, in order for you to achieve the best results.
All of our concrete floor screeds can be offered with same or next day delivery throughout Woolwich, at a time to suit you.
Get a Quote Fast
"*" indicates required fields
Instant Screed Volume Calculator
Find out how much concrete you will need
Our Concrete Services in Woolwich
In addition to concrete screed, we are specialists in ALL types of concrete and cement for same day and next day delivery around Woolwich
Concrete Boom Pumping
Concrete boom pumps allow us to pump concrete up and over large objects and place concrete at height. They can be relocated quickly, to pump concrete into several different Woolwich locations in a small amount of time. This is ideal for pouring concrete pilings or reinforced pillars.
Concrete Line Pumping
Line pumped concrete is an excellent solution for getting your ready mix concrete to those difficult to access areas in Woolwich. Our ground line pumps are capable of pumping up to 150 metres along the ground, enabling us to reach almost any destination at a rate of up to 120m³ per hour.
On Site Concrete Mix
Our on-site concrete mixing lorries can produce varying concrete strengths from one load. The composition can be quickly changed to suit different project or Woolwich weather conditions. Mix-on-site concrete works for large foundations, concrete floors, driveways, shed bases and all other projects.
Concrete Floor Screed
Screed is a thin layer of specialist concrete that can be applied to flooring to create a smooth finish. We use quality aggregates to mix concrete floor screeds ideal for any type of application. We can add polypropylene fibres to strengthen bonding, or adjust liquid screed consistency and finish.
Ready Mixed Concrete
Our 'Ready Mix Concrete' uses our state of the art volumetric concrete lorries to provide a mix-on-site service in Woolwich. Our lorry counter systems mean you only ever pay for what you use. Nothing is mixed from the separate compartments until the lorry arrives on site, so you never have to pay for cement you didn't want.
Volumetric Concrete
Volumetric mixing is the ideal form of concrete delivery, as only the exact amount of concrete needed is mixed. This means there is no wastage, it's environmentally friendly, plus much more efficient and convenient. Volumetric mixing minimises cost and maximises flexibility for all concreting projects.
Types of Floor Screed We Supply in Woolwich
Not every project needs the same screed. The right choice depends on the substrate, the depth you have to work with, whether underfloor heating is involved and how quickly the floor needs to take traffic. As screed suppliers rather than screeding contractors, we batch to your spec and deliver across Woolwich and the surrounding area. If you are unsure which mix suits your project, call our team on 020 3193 8845, and we will talk it through.
Sand & Cement Screed
The traditional option and still the most widely specified. A semi-dry mix of cement and sharp sand, laid and compacted by hand or with a beam, then floated to a smooth finish. It suits bonded, unbonded and floating applications and takes almost any floor covering once fully cured. Strength can be adjusted at batching, so we can supply anything from a standard domestic mix to a heavy-duty industrial specification.
Liquid Screed and Flow Screed
Liquid screed is pumped rather than laid, which means it flows into place and self-levels with minimal labour. It can be installed at shallower depths than traditional screed and covers large areas far faster, so it is often the sensible choice on tight programmes or open plan layouts. Because it makes full contact around pipework, it is also the best performing option over underfloor heating. We can pump directly from the mixer to the pour, including upper floors and restricted access sites around Woolwich.
Self Levelling Screed
Used as a finishing layer rather than a structural one, self-levelling screed is applied thinly over an existing sound substrate to correct minor undulations and produce a flat, tolerance ready surface. It is the usual answer when a floor is structurally fine but not level enough for vinyl, resin or large format tile. Depths are typically only a few millimetres, so it is not a substitute for a proper structural screed where levels need building up.
Fibre Reinforced Screed
Polypropylene fibres are added at the mixing stage and distribute through the whole body of the screed, controlling shrinkage cracking as it cures. On many projects, this removes the need to lay steel mesh, which saves time on site and avoids the risk of mesh sitting at the wrong depth. It is a common specification for floating screeds over insulation and for bays where cracking would show through the finish. We can add fibres to any of our screed mixes on request.
Fast Drying Screed
Where the programme will not tolerate a standard drying period, a fast-drying mix uses modified binders to reach a coverable moisture content in a fraction of the time. On a typical domestic depth, this can mean floor coverings going down in days rather than weeks. It costs more per cubic metre than a standard mix, so it is worth weighing against the cost of the delay it removes. Ask us for a comparison when you enquire.
Ready Mix & Volumetric Screed
All our screed is batched fresh, and our volumetric lorries mix on site rather than arriving with a pre-mixed load. That means the mix can be adjusted on arrival if site conditions differ from the plan, there is no risk of a load going off in transit, and you only pay for the volume you actually use. For anyone ordering screed in Woolwich for the first time, this is usually the single biggest cost saving compared with ordering fixed loads and paying for the waste.
How Long Does Screed Take to Dry in Woolwich?
As a rough guide, a traditional sand and cement screed dries at around one millimetre per day for the first 50mm, then slows to roughly half that beyond it. That puts a standard 75mm floating screed at somewhere near three months before it is ready for a moisture sensitive floor covering. Liquid screed is quicker, and a fast-drying mix quicker again.
It helps to separate two things that often get confused. Screed is usually walkable within 24 to 48 hours and takes light traffic after about a week, but that is curing, not drying. Drying is about moisture leaving the screed, and floor coverings cannot go down until it is complete.
Typical Drying Times by Screed Type
- Traditional sand and cement: Around 1mm per day to 50mm, then slower. Allow roughly 100 to 110 days at 75mm
- Liquid and flow screed: Around 1mm per day to 40mm, then slower. Typically 40 to 60 per cent faster than traditional at the same depth
- Fast drying and modified mixes: Coverable in days rather than weeks depending on product and depth
- Self levelling compounds: Often ready for covering within 24 to 48 hours given the shallow depth
What Affects Drying Time on Site
- Depth: The single biggest factor, and it is not linear. Doubling the depth more than doubles the drying time
- Ventilation: Still air holds moisture against the surface. Open the building up once the screed has cured
- Temperature and humidity: A cold, damp Woolwich winter will add significantly to the timescale compared with a dry summer pour
- Underfloor heating: The system must be commissioned gradually, not switched on to speed things up. Ramping too fast causes cracking
- Force drying: Dehumidifiers help, but not before the screed has cured for at least seven days
- Substrate: A screed over a membrane or insulation can only dry upwards, so it takes longer than a bonded screed
When Can You Lay Floor Coverings?
Do not rely on the calendar alone. Before laying vinyl, resin, engineered timber or anything else moisture sensitive, the screed should be tested with a hygrometer to confirm relative humidity has fallen to the level the covering manufacturer requires, usually 75 per cent or lower. Laying too early is the most common cause of adhesive failure and lifting floors, and it is an expensive mistake to put right.
Screed for Underfloor Heating in Woolwich
Underfloor heating changes what the screed has to do. It is no longer just a level surface; it is the layer that transfers heat from the pipes into the room, so how well it encases the pipework directly affects how efficiently the system runs.
Liquid screed performs better here than traditional sand and cement. Because it flows, it makes full contact all the way around and underneath the pipes with no voids, and voids are what cause cold spots and slow response. It can also be laid thinner while still giving the required cover, which means less material to heat and a system that reaches temperature faster.
Key points to get right:
- Cover over the pipes should be at least 25mm to 30mm, with the total screed depth typically 65mm or more
- Fibre reinforcement is strongly recommended, as heating and cooling cycles put the screed through repeated expansion and contraction
- The system should be pressure tested and left under pressure while the screed is poured
- Commissioning must be gradual. Leave the heating off for at least seven days, then raise the temperature in small increments over several days
- Deeper screeds hold heat longer but respond more slowly. Shallower screeds respond faster but lose heat more quickly. Your heating designer will set the balance
If you are pouring over underfloor heating anywhere in Woolwich, call 020 3193 8845 before you order, and we will confirm the mix and depth against your system.
How Much Does Concrete Floor Screed cost in Woolwich SE18?
The price for Concrete Floor Screed depends on a number of factors:
- Size of area
- Age of area
- Additional features
- Access to area
- Condition of the current area
- Many other factors....
Prices for Woolwich Concrete Floor Screed can vary a great deal when the above information is taken into account.
The best method is for us to arrange a free, no-obligation survey of your Woolwich location. We can then put together the best, most accurate price quote.
Get Your Woolwich Concrete Screed Quote by Calling 020 3193 8845
Only Pay for the Concrete You Use
Concrete Screed Delivered in Woolwich
Why Choose Us to Deliver Your Screed?
All Types of Mixes Available
We Deliver On-Site to Woolwich
Same Day & Next Day Delivery
Commercial & Domestic Concrete
Fast & Reliable Woolwich Concrete Service
24 Hour Woolwich Service
FAQs about Our Concrete Floor Screed Services in Woolwich
Absolutely. Our screed for underfloor heating is specially formulated to improve heat transfer and ensure an even finish. We regularly supply this type of screed for residential and commercial builds in Woolwich.
Yes, we offer fast drying screed solutions in Woolwich for projects that require quicker turnaround times. It’s ideal when floor coverings need to be laid sooner than usual.
We deliver concrete floor screed throughout Woolwich and the surrounding areas including Hainault, South Woodford, Woodford Green, Crossness, Plumstead, Shooter's Hill, West Heath and all local postcodes. If you’re unsure whether we cover your postcode, get in touch with our team.
Yes, we offer self-levelling screed that creates a flat, even surface with minimal manual work. It’s a popular choice for flooring jobs in Woolwich where a perfectly smooth finish is essential.
Yes, we provide high-quality liquid floor screed across Woolwich for both domestic and commercial applications. It offers a smooth, level finish ideal for underfloor heating and large surface areas.
We’re experienced floor screeding contractors in Woolwich, offering reliable delivery and expert advice. All our screed is mixed to order and delivered directly to your site using our modern fleet.
We supply a range of floor screeds in Woolwich, including traditional sand and cement screed and self-levelling liquid screed, suitable for various construction and refurbishment projects.
The cost of floor screed in Woolwich depends on the type of screed, project size, and site access. For an accurate quote, contact our team today and we’ll provide a competitive price based on your exact requirements.
Not in Woolwich SE18? Still looking for "Concrete Floor Screed companies near me..." ?
We have years of experience providing our local clients with pre-mixed concrete and cement, however we also cover all of London, Kent, Surrey and many other regions:
- Concrete Floor Screed Central London
- Concrete Floor Screed Elmers End
- Concrete Floor Screed Spitalfields
- Concrete Floor Screed Epsom
- Concrete Floor Screed Brockham
- Concrete Floor Screed Crockham Hill
- Concrete Floor Screed South East London
- Concrete Floor Screed East London
Plus: